Sharp MZ-800 - 8.5 BASIC Monitor

B Command
Format B
Explanation This command specifies that the buzzer in the MZ-800 sounds every time a key is
Example
pressed. If the B command is entered again, the buzzer toggles off and no longer
sounds.
+8 [ca]
8.5 BASIC Monitor
When the BASIC interpreter is used, the BASIC monitor can be used instead of the ROM monitor.
To call the BASIC monitor, key in the BASIC BYE command, After the prompt ‘‘*"’ is displayed,
key in a BASIC monitor command.
The BASIC monitor uses memory area $FFOO to $FFFF as its stack area.
All variables for BASIC programs are not changed when the BASIC monitor is called, but they can
be changed by monitor commands.
ae af