4
Information on the 3D Projection Function
To display 3D images, this projector requires:
WHAT YOU WILL NEED
1） Source devices that support the fi eld sequential format
–
For details on the supported signals, see the Compatibility Chart in this operation manual.
2） 3D LCD shutter glasses that support the
*
DLP
®
Link™ system
–
Contact your nearest Sharp Authorized Projector Dealer for purchasing details.
* DLP
®
Link™ is a trademark of Texas Instruments.
The projected image may become dark when using the 3D projection function (with DLP
®
Link™ set to On).
When DLP
®
Link™ is set to On, the following functions may not work fully or may not be
available at all.
– Keystone
– Resize
– Image Shift
– Magnify
A 3D standard format does not currently exist for Blu-ray or DVD prepackaged media.
A 3D standard may emerge that is not compatible with this projector. (As of November 2009)
If the power of your left and right eyes greatly differs and you primarily use one eye for
viewing the images, the images will not appear in 3D.
In addition, images may be diffi cult to view in 3D or images may not be able to be viewed
in 3D depending on the individual or the content being displayed.
The stereoscopic effect varies with the individual.
3D viewing is possible within the range that the 3D LCD shutter glasses are able to receive
light signals refl ected by the screen. However, most 3D images are manufactured to be
viewed from directly in front of the screen, so 3D viewing is recommended directly in front
of the screen as much as possible.
– The range for receiving signals varies depending on the 3D LCD shutter glasses. For
details, see the operation manual of your 3D LCD shutter glasses.
3D images may not be able to be played back correctly on your computer.
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General