Sharp PJ-ST161 - Component Replacement Procedures - Part 1; Remove Grille Assembly; Remove Base Assembly

5
REMOVE OF GRILLE ASS’Y
COMPONENT REPLACEMENT PROCEDURE
1. Unlock the xing lock and pull the front grille.
2. Turn the spinner fan clockwise and remove the blade.
3. Turn the grille lock nut counterclockwise and remove the rear grille.
Fig. 1
Fig. 2
Detach the xing lock
to unlock.
Front grille
Spinner fan
Blade
Grille lock nut
Fixing lock
Screw
Base ass’y
Body
Rear grille
Motor ass’y
REMOVE OF BASE ASS’Y
1. Remove the grille ass’y in accordance with “REMOVE OF GRILLE ASS’Y”.
2. Remove 2 screws holding base ass’y and detach the unit from the base ass’y.
3. Now the base ass’y is free.