1
Thank you for purchasing a SHARP air conditioner.
Please read this manual carefully before operating
the product.
CONTENTS
• IMPORTANT SAFETY INSTRUCTIONS ..................1
• SPECIFICATIONS ....................................................
2
• PART NAMES...........................................................2
• USING THE REMOTE CONTROL ...........................4
• SETTING AIR PURIFYING FILTER ........................
5
• TIPS ON SAVING ENERGY .....................................5
• AUXILIARY MODE ...................................................
5
• BASIC OPERATION .................................................6
• ADJUSTING THE AIR FLOW DIRECTION ..............7
• PROGRESSIVE AIRFLOW ......................................
8
• POWERFUL JET OPERATION ................................8
• PLASMACLUSTER OPERATION ............................
9
• SELF CLEAN OPERATION ......................................9
• ONE-HOUR OFF TIMER ........................................10
• TIMER OPERATION ..............................................10
• MAINTENANCE .....................................................12
• ADDITIONAL NOTES ON OPERATION ................13
• BEFORE CALLING FOR SERVICE .......................13
WARNINGS FOR INSTALLATION/
REMOVAL/REPAIR
For your safety, ensure that your new air conditioner
is installed by a licensed air conditioning contractor in
accordance with the AUSTRALIAN/NEW ZEALAND
WIRING RULES.
• Do not attempt to install/remove/repair the unit
by yourself. Incorrect work could cause electric
shock, water leak, re etc. Consult a licensed air
conditioning contractor for the installation/removal/
repair of the unit.
CAUTIONS FOR USE
1
If a gas appliance is used in the same room as
the air conditioner, ventilate the room periodically
to prevent oxygen depletion.
2
For safety, do not touch the unit with wet hands, it
may cause an electric shock.
3
For safety, turn the circuit breaker off when not
using the unit for an extended period of time.
4
For safety, do not place anything on top of the
outdoor unit or step on it.
5
This unit is designed for residential use. Do not
use for other applications such as in a kennel or
greenhouse to raise animals or grow plants.
6
Do not block the air inlets or outlets of the unit.
7
For safety, be sure to turn the unit off at the circuit
breaker before performing any maintenance or
cleaning.
8
Do not pour water directly on the unit. Water can
cause electrical shock or equipment failure.
9
This appliance is not intended for use by young
children or inrm persons unless they have been
adequately supervise by a responsible person to
ensure that they can use the appliance safely.
Young children should be supervised to ensure
that they do not play with the appliance.
CAUTIONS FOR LOCATION/
INSTALLATION
To ensure that your warranty is not affected, both the
indoor/outdoor units and supply/interconnecting cables
must be installed by a licensed air conditioning con-
tractor.
• The unit is designed to operate on 230-240 VAC,
50Hz
• Do not install the unit where ammable gas may
leak. It may cause a re.
SPECIFICATIONS
Indoor unit AY-XP9JJ AY-XP12JJ
Outdoor unit AE-XP9JJ AE-XP12JJ
Rated A.C. voltage (V) 230-240 230-240
Rated frequency (Hz) 50 50
Cooling capacity (kW)* 2.5 3.5
Heating capacity (kW)* 3.2 4.0
*When tested in accordance with AS/NZS3823.1.1.
IMPORTANT SAFETY
INSTRUCTIONS
WARNINGS FOR USE
1
This model should be installed with a xed power
cord to the meter box.
2
Be careful not to expose your body to the outlet
air for prolonged periods. It may affect your
physical condition.
3
When using the air conditioner for infants,
children, elderly, bedridden or disabled people
make sure the room temperature is suitable for
those in the room.
4
Never insert objects into the unit. Inserting
objects can result in injury due to the high speed
rotation of the internal fans.
5
If anything abnormal is noticed with the air
conditioner (eg burning smell), stop the operation
immediately and turn the circuit breaker off.
6
This air conditioner should be installed by a
licensed air conditioning contractor in accordance
with AS/NZS 3000 and your electricity suppliers
service rules.
7
There are local council rules regarding maximum
allowable noise levels emitted by air conditioners,
your licensed air conditioning contractor will
advise you on the correct location of your outdoor
unit.
8
Use only the manufacturer-specified power
cord for replacement. Replacement should be
performed by a service centre approved by
SHARP.
IMPORTANT SAFETY
INSTRUCTIONS
To Next Page
Loading...
Need help?
General
