VERTICAL AIR FLOW DIRECTION
1
Press the SWING button( ) on the re-
mote control once.
• The vertical adjustment louvre will swing con-
tinuously.
2
Press the SWING button( ) again when
the vertical adjustment louvre is at the
desired position.
• The louvre will stop moving within the range
shown in the diagram.
Adjustment range
COOL and DRY modes
HEA
T mode
HORIZONTAL AIR FLOW DIRECTION
1
Press the SWING button( ) on the re-
mote control once.
• The horizontal adjustment louvres will swing
continuously.
2
Press the SWING button( ) again when
the horizontal adjustment louvres are at
the desired position.
NOTE:
• The adjusted position will be memorised and will be
automatically set to the same position when oper-
ated the next time.
• The adjustment range is narrower than the SWING
range in order to prevent condensation from drip-
ping.
CAUTION:
Never attempt to adjust the louvres manually.
• Manual adjustment of the louvres can cause the
unit to malfunction.
• When the vertical adjustment louvre is positioned
at the lowest position in the COOL or DRY mode
for an extended period of time, condensation may
result.
ADJUSTING THE AIR FLOW DIRECTION
To Next Page
Loading...
Need help?
General
