E-13
QUICK CLEAN Mode with humidication releases concentrated Plasmacluster ions. By re-
peating strong and gentle airow cycles, the unit effectively removes airborne dust, pollen,
mold and allergens from the air drawn through the lter system. Water must be in the Water
Tank when this mode is selected.
QUICK CLEAN MODE
1
Press the QUICK CLEAN MODE Button on the
display to select this mode.
When the operation nishes, the unit will return to the prior
operation.
FAN SPEED Button
AUTO operation
The fan speed is automatically switched (HIGH*, MEDIUM, LOW) depending on
the amount of impurities in the air. The sensors detect the impurities for efcient air
purication.
MAX operation
MEDIUM operation
LOW operation
The unit will operate at maximun fan speed .
The unit will operate at medium fan speed .
The unit will operate quietly using minimal air intake.
* HIGH fan speed is an intermediate speed between MEDIUM and MAX.
Plasmacluster ON/OFF Button
Press the Plasmacluster ON/OFF Button to turn Plasmaclus-
ter Ion Mode ON and OFF. A green light will indicate that the
Plasmacluster Ion Mode in ON.
POWER OFF Button
Press the Power OFF Button to turn the unit off.
The unit humidies when there’s water in the Water Tank, and it operates without humidifying
when there’s no water in it.
Press the FAN SPEED Button to select the preferred fan settings.
Indicator lights will show the speed currently selected. Please note
the fan speed cannot be adjusted during the QUICK CLEAN Mode.
To Next Page
Loading...
Need help?
General
