Sharp PN-70HC1E - Turning Power On;Off

ENGLISH
7
E
Turning Power On/Off
TIPS
• Tousethetouchpanel,connecttheUSBcable(supplied)toyourcomputer.
• Thetouchpaneloperateswiththestandarddriverofeachoperatingsystem.OntheMac,operationisonlypossibleinmouse
mode.
• InstallPenSoftwarefromthesuppliedCD-ROM.
WhentheInformationDisplayDownloaderisinstalled,youcancheckanddownloadthemostrecentversionsofthesoftware
programs.
To install the software, see the manual for each.
• Apple,MacandmacOSaretrademarksofAppleInc.,registeredintheU.S.andothercountries.
• ThetermsHDMI,HDMIHigh-DefinitionMultimediaInterface,andtheHDMILogoaretrademarksorregisteredtrademarksof
HDMI Licensing Administrator, Inc.
• Adobe,Acrobat,andAcrobatReaderareeitherregisteredtrademarksortrademarksofAdobeSystemsIncorporatedinthe
UnitedStatesand/orothercountries.
• VESAiseitherregisteredtrademarkortrademarkofVideoElectronicsStandardsAssociationintheUnitedStatesand/or
other countries.
• Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveholders.
Caution
• Turnonthemonitorfirstbeforeturningonthecomputeror
playbackdevice.
• WhenswitchingthemainpowerswitchorthePOWER
buttonoffandbackon,alwayswaitforatleast5seconds.
A short interval may result in a malfunction.
Turning on the main power
Main power switch
Whenyouturnonthemainpower,themonitorentersstandby
mode.
Caution
• Themainpowermustbeturnedon/offwiththemainpower
switch.Donotconnect/disconnectthepowercordorturn
thebreakeron/offwhilethemainpowerswitchison.
• Foracompleteelectricaldisconnection,pulloutthemain
plug.
Turning power on/off
PressthePOWERbuttontoturnthepowerON/OFF.
YoucanalsoturnthepowerON/OFFbypressingtheMONITOR
ONbutton/MONITOROFFbuttonontheremotecontrolunit.
Power LED
POWER button
Status Status of the monitor
Bluelit Power on
Red lit Poweroff(Standbymode)
TIPS
• Whenthemainpowerswitchisoff,themonitorcannotbe
turned on.
n
Operation mode
Whenthemonitoristurnedonforthefirsttimeafterbeing
shipped from the factory, the operation mode setting screen
willbedisplayed.SetittoMode1orMode2.
Mode1......Off If No Operation is set to On, and Power Save
ModeissettoOn.(Thesesettingscannotbe
changed.)
If there is no operation for 4 hours or more, the
monitorautomaticallyentersstandbymode.Power
consumptioninstandbymodeisalsominimized.
Mode2......Willperformstandardoperation.
Off If No Operation is set to Off, and Power Save
ModeissettoOff.Thesesettingscanbechanged.
Evenafterbeingset,changescanbemadeusingOperation
Mode, located in the menu of the monitor. (See OPERATION
MANUAL.)