Sharp PN-B401 - Connecting the Power Cord; Step-by-Step Power Cord Connection

13
E
Connecting the Power Cord
Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the power outlet.
Main power
switch
AC input
terminal
12
For power
outlet
3
Power cord (Supplied)
Binding Cables
The supplied cable clamps (afxing type) can be used to clamp the power code and cables connected to the back of the monitor.
Caution
• Attach the supplied cable clamps to a at surface. Do not attach over a vent.
• Remove any dust or dirt before attaching.
Cable clamp
(affixing type)
Affixing point
Cable