Confidential
Copyright © All rights reserved, SHARP CORPORATION
10
Move after installation
When you move after installation, please observe the following notices.
・Turn off the information display and connected equipments and remove connected cables.
・ Move the stand with more than 2 persons.
The stand may fall down due to unexpected shocks or the slope way, therefore please hold the left and right
side of the display with two persons.
・You can move the stand with display only indoors. In case there are uneven floor on the pathway,
please take countermeasures to absorb the shock/vibration. They can cause malfunction.
* After move, please confirm that the fixation of stand pillar have not become loose.
* After move, please confirm that the screws attached to the display are tight.
5. Precautions for a stand installation
To Next Page
Loading...
