Sharp PN-HS431

12
E
Connecting the Power Cord
Caution
• Use only the power cord supplied with the monitor.
1. Turn o󰀨 the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the power outlet.
1
2
Main power
switch
AC input
terminal
Power cord (Supplied)
For power outlet
3
Binding Cables
The supplied cable clamps (a󰀩xing type) can be used to clamp the power cord and cables connected to the back of the monitor.
Caution
• Attach the supplied cable clamps to a at surface. Do not attach over a vent.
• Remove any dust or dirt before attaching.
Cable clamp
(affixing type)
Affixing point
Cable