Sharp PN-HS431

27
E
Menu Items
Caution
• Do not turn o󰀨 the main power after setting the SCHEDULE.
• Schedule ON and then OFF only take place in standby
state and input signal waiting state.
• Specify the correct date and time. (See page 24.)
SCHEDULE does not function unless the date and time are
specied.
• Check regularly that the set date and time are correct.
TIPS
• Up to 7 SCHEDULE items can be registered.
• Setting the SCHEDULE ashes the power LED alternately
in red and orange in standby state.
• A SCHEDULE that has a small number has precedence
over that of a large number when schedules overlap.
Adjustments for computer screen display
n
Automatic adjustment
When you use the D-SUB to display a computer screen for the
rst time, or when you change the setting of the computer, use
the automatic screen adjustment.
1. Switch the input to D-SUB and display the adjustment
pattern. (See the description below.)
2. Press the MENU button and use the
or button to
display the SETUP menu.
3. Press the
or button to select SCREEN, and press
the
button.
4. Press the
or button to select AUTO, and press the
button.
The automatic adjustment is complete in several seconds.
5. Press the MENU button to close the menu screen.
TIPS
• If the screen cannot be adjusted properly with one
automatic adjustment, repeat the automatic adjustment two
or three times. Try manual adjustment if necessary.
n
Screen display for adjustment
Before making adjustments in the SCREEN menu or PICTURE
menu, display an image to brighten the entire screen.
If you are using a Windows computer, use the adjustment pattern.
The adjustment pattern can be downloaded from home page.
https://business.sharpusa.com/product-downloads
* You must be in a network environment that allows access
to the Internet.
Opening the adjustment pattern
1. Double-click [Adj_uty.exe] downloaded.
The adjustment pattern will appear.
Adjust the screen automatically or manually.
2. Whenadjustmentisnished,pressthe[Esc]onthe
computer’s keyboard to quit the adjustment program.
TIPS
• If the display mode on the computer you are using is 65000
colors, the color levels in the color pattern may appear
di󰀨erently or grayscale may appear to be colored. (This
is due to the specications of the input signal and is not a
malfunction.)