Sharp PN-HS431 User Manual

17
E
Basic Operation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1. HDMI
Switch the input mode to HDMI1, HDMI2 or HDMI3.
2. Numeric input buttons
These buttons are used for setting such as LAN setting.
3. MUTE
Turns o󰀨 the volume temporarily.
Press the MUTE button again to turn the sound back to the
previous level.
4. MODE (Color mode selection)
Each time you press this button, the color mode changes in
the following order:
STD (Standard) → VIVID → sRGB →
HIGH ILLUMINANCE → STD...
• HIGH ILLUMINANCE is a display with colors suited to
bright locations.
• sRGB is international standard of color representation
specied by IEC (International Electrotechnical
Commission). Color conversion is made in taking account
of liquid crystal’s characteristics and represents color tone
close to its original image.
5. VOLUME +/- (Volume adjustment)
Press + or - to adjust the volume.
6. INFORMATION
Displays monitor information.
7. FUNCTION
Disable the MONITOR BUTTONS LOCK and REMOTE
CONTROL LOCK. (See page 26.)
8. ENTER
Conrms the setting.
9. FREEZE
This is not used with this monitor.
10. Buttons for MEDIA PLAYER or operating the HDMI-
connected device
• This is used in MEDIA PLAYER. For details, see page 20.
• When HDMI CEC LINK is set to AUTO, use these buttons
to operate the device connected through the HDMI
interface.
11. ID SET
This is not used with this monitor.
12. OPTION
This is not used with this monitor.
13. DP (DisplayPort)
This is not used with this monitor.
14. SIZE (Screen size selection)
Each time you press this button, the screen size changes. (See
page 19.)
15. PIP/PbyP
This is not used with this monitor.

Sharp PN-HS431 Specifications

General

Screen Size	43 inches
Contrast Ratio	4000:1
Built-in Speakers	Yes
VESA Mount	Yes (200 x 200 mm)
Aspect Ratio	16:9
Resolution	1920 x 1080 pixels
Response Time	8 ms
Viewing Angle	178° (H) / 178° (V)
Input Ports	HDMI, DisplayPort, DVI-D
Output Ports	3.5mm audio out
USB Ports	2 x USB 2.0