EasyManuals Logo

Sharp PN-L802B User Manual

Sharp PN-L802B
832 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #478 background imageLoading...
Page #478 background image
4-133
FACSIMILE
Contents
CHECKING COMPLETED JOBS
You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on
completed broadcast transmission jobs, received fax forwarding jobs, serial polling jobs, and jobs that used document
filing. Touch the key of the desired job in the completed jobs screen and touch the [Detail] key. The job detail screen
(see below) will appear.
The job name appears at the top of the job detail screen.
To view details on the job, touch one of the tabs. The following information appears on each tab.
* Recalling is not possible for a broadcast transmission that includes a Scan to FTP address, Scan to Network Folder
address, or Scan to Desktop address.
Tab name Information displayed
File Information on a transmission/reception that used document filing.
To retrieve the file and use it, touch the [Call] key.
The File tab does not appear when the hard disk drive is not installed.
Failed This shows information on destinations for which communication failed. A broadcast
control number (3-digits) appears in front of each destination.
Address: The name or fax number of each destination.
Start time: Time at which communication began.
Status: Description of failure (error)
The [Retry] key can be touched to re-attempt transmission to that destination.*
All Destinations Shows all addresses specified in the job. A broadcast control number (3-digits)
appears in front of each destination.
Address: The name or fax number of each destination.
Start time: Time at which communication began.
Status: Communication result
The [Retry] key can be touched to transmit to all destinations again.*
EEE EEE
DDD DDD002
010
Address Start Time
10:01 04/01
10:10 04/01
Status
NG000000
NG000000
1
1
Detail
OK
Retry
Broadcast0001
File
Failed All Destinations

Table of Contents

Other manuals for Sharp PN-L802B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp PN-L802B and is the answer not in the manual?

Sharp PN-L802B Specifications

General IconGeneral
Pixel pitch0.923 x 0.923 mm
Aspect ratio16:9
Screen shapeFlat
LED backlightYes
Response time6 ms
Display diagonal80 \
Display brightness300 cd/m²
Display technologyLCD
Touchscreen technologyOptical imaging
Contrast ratio (typical)3000:1
Display number of colors1.073 billion colors
Display diagonal (metric)203.2 cm
Product colorGray
Display viewable area (HxV)1771.2 x 996.3 mm
Audio input1
RS-232 ports2
AC input voltage100 - 240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Power consumption (typical)260 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
NVIDIA G-SYNCNo
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)135 mm
Width (without stand)1880 mm
Height (without stand)1157 mm
Weight (without stand)102000 g

Related product manuals