Sharp PN-LC652

33
E
Whiteboard
Drawing
The side of the touch pen (supplied) that is touching the screen, enabling the two sides to be used as different pens.
1. Touch
.
The line setting (color, thickness, opacity, nib) can be changed.
Recognizes and formats the drawn figures. *
2
Erasing a drawn line.
Recognizes and formats the drawn characters.*
1
Configure the settings for drawing with
the thin nib of the touch pen (supplied).
Configure the settings for drawing with the
thick nib of the touch pen (supplied) or finger.
2. Draw.
TIPS
• Depending on the drawn shape, it may not be correctly formatted.
*1 Write the characters in one line. Even if you write characters in multiple lines, they will be formatted in one line.
The recognized characters differ depending on the “Language” setting of “Language & keyboard” in the System menu.
*2 Recognizes straight lines, circles, arrows, triangles, rectangles and star shapes.
Arrows, triangles, rectangles and star shapes will not be recognized if drawn diagonally. Draw it horizontally or vertically,
and rotate it after it is recognized.
Erasing a drawn line
1. Touch .
: The lines in the touched areas will be erased.
: The lines in the dragged area will be erased.
Lines will be completely erased if even some of their portions are contained inside the said area.
: All lines on the sheet will be erased.
Slide the switch to the right.
You can erase an area of the screen that you touch with your palm.
Touch the screen with your palm, and when the cursor is appear, move your palm.