Sharp PN-LC652

52
E
n
Schedule
You can set the time to switch the monitor on and off.
Set this function with “Power status” in the System menu. (See
page 51.)
1. Touch “+” for the “Add schedule”.
2. Select “Power on”, “Power off” or “Reboot”.
3. Set the time and day of implementation.
When “Reboot” is selected, set the time of implementation.
Restart will occur daily.
4. Touch “Save”.
The schedule is displayed as a list.
5. Turn on the schedule.
You can also turn off the schedule.
Caution
• Do not switch off the main power after setting the schedule.
• Specify the correct date and time. (See page 51.)
Schedule does not function unless the date and time are
specified.
• Check regularly that the set date and time are correct.
• In the power off schedule, a message is displayed on the
screen when it is time to turn off. If you select “Cancel”, you
can stop the power from turning off.
• Each schedule must be set at an interval of 6 minutes or
more.
TIPS
• Up to 15 “Schedule” items can be registered.
Adjustments for computer screen display
n
Automatic adjustment
When you use the “D-SUB” to display a computer screen for
the first time, or when you change the setting of the computer,
use the automatic screen adjustment.
1. Switch the input to “D-SUB” and display the
adjustment pattern. (See the description below.)
2.
Touch on the sidebar and touch “System Settings”.
3. Touch “Auto” on the Input menu.
TIPS
• If the screen cannot be adjusted properly with one
automatic adjustment, repeat the automatic adjustment two
or three times. Try manual adjustment if necessary.
n
Screen display for adjustment
Before making adjustments, display an image to brighten the
entire screen. If you are using a Windows computer, use the
adjustment pattern. Download the adjustment pattern by using
Information Display Downloader.
Opening the adjustment pattern
1. Double-click [Adj_uty.exe] downloaded.
The adjustment pattern will appear.
Adjust the screen automatically or manually.
2. When adjustment is finished, press the [Esc] on the
computer’s keyboard to quit the adjustment program.
TIPS
• If the display mode on the computer you are using is 65000
colors, the color levels in the color pattern may appear
differently or grayscale may appear to be colored. (This
is due to the specifications of the input signal and is not a
malfunction.)
Menu Items