Sharp PN-UH861 - Binding Cables; Attaching the Logo Sticker

15
E
Binding Cables
You can attach the supplied logo sticker on this monitor.
Refer to the following example to attach the sticker as necessary.
Attaching the logo sticker
The supplied cable clamps (afxing type) can be used to clamp the power cord and cables connected to the back of the monitor.
Caution
• Attach the supplied cable clamps to a at surface. Do not attach over a vent.
• Remove any dust or dirt before attaching.
Cable clamp
(affixing type)
Cable
Affixing point