Sharp PN-UH861 - Adjustments for Computer Screen Display

28
E
Adjustments for computer screen display
n
Automatic adjustment
When you use the D-SUB to display a computer screen for the
rst time, or when you change the setting of the computer, use
the automatic screen adjustment.
1. Switch the input to D-SUB and display the adjustment
pattern. (See the description below.)
2. Press the MENU button and use the
or button to
display the “Setup” menu.
3. Select “Auto” on the “Screen” menu.
4. Press the ENTER button.
The automatic adjustment is complete in several seconds.
5. Press the EXIT button to close the menu screen.
TIPS
• If the screen cannot be adjusted properly with one
automatic adjustment, repeat the automatic adjustment two
or three times. Try manual adjustment if necessary.
n
Screen display for adjustment
Before making adjustments in the “Setup” menu or “Picture”
menu, display an image to brighten the entire screen. If you
are using a Windows computer, use the adjustment pattern on
the supplied CD-ROM.
Opening the adjustment pattern
The following example is performed in Windows 7.
1. Load the supplied CD-ROM into the computer’s CD-
ROM drive.
2. Open [CD Drive] in [Computer].
3. Double-click [Adj_uty.exe].
The adjustment pattern will appear.
Adjust the screen automatically or manually.
4. When adjustment is nished, press the [Esc] on the
computer’s keyboard to quit the adjustment program.
5. Eject the CD-ROM from the CD-ROM drive.
TIPS
• If the display mode on the computer you are using is 65000
colors, the color levels in the color pattern may appear
differently or grayscale may appear to be colored. (This
is due to the specications of the input signal and is not a
malfunction.)
Menu Items