Sharp PN-UH861 - Basic Operation

18
E
Basic Operation
2
4
6
5
3
7
9
10
8
11
12
1
1. Numeric input buttons
Manually enter a channel.
You can also use the button when you enter numeric or dot.
2. DISPLAY
Displays information of displayed channel or monitor.
3. MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the
previous level.
4. VOL +/- (Volume adjustment)
Press + or - to adjust the volume.
5. ENTER
Conrms the setting.
Press the ENTER button while watching TV to display the
channel list.
6. EXIT
Turns off the menu screen.
7. INPUT (Input mode selection)
The menu is displayed. Press the
or button to select the
input mode, and press the ENTER button to enter.
* You can change the input mode by pressing the INPUT
button of the monitor. (PN-UH551/PN-UH501/PN-UH431)
Input mode Video Audio
TV Antenna terminal Antenna terminal
HDMI1 HDMI1 input terminal HDMI1 input terminal
HDMI2 HDMI2 input terminal HDMI2 input terminal
D-SUB D-sub input terminal Audio input terminal
USB USB port USB port
8. AUDIO
Change MTS or audio language.
9. CH˄/˅
Changes channel.
10. FAVORITE
Displays registered favorite channel list.
This is used in Media Player. (See page 20.)
11. Cursor
These buttons are used to perform operations such as
selecting items, changing adjustment values, and moving the
cursor.
12. MENU
Displays the menu screen. Returns to previous screen while
the menu items are being displayed. (See page 22.)
TIPS
• Buttons other than the above are not used with this monitor.