EasyManua.ls Logo

Sharp PN-V602A - Basic Operation

Sharp PN-V602A
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
E
Basic Operation
Whenperformingoperationofmultiplemonitorswiththe
remotecontrolunit,rstsettheremotecontrolunittothe
appropriateremotecontrolmode(seepage21).
1
2
3
4
5
6
7
8
TIPS
• Youcanperformoperationofthemonitorwiththerear
buttons.Utilizethebuttonsbelongingtothemonitorthat
you would like to operate.
• Operationbyusingthebuttonsontherearsideofthe
product will perform the same functions.
Rear side buttons
Remote control
unit buttons
This manual assumes that this product will be used with
theremotecontrolunitbuttons,exceptwherespecically
noted.
1. INPUT (Input mode selection)
The menu is displayed. Press
or to select the input
mode, and press
to enter.
Input mode Video Audio
PCD-SUB PCD-subinputterminal
*1
Audio input terminal
PCHDMI
PC/AVHDMIinputterminal
*2
*3
AVHDMI
PC/AVHDMIinputterminal
*2
AVCOMPONENT PCD-subinputterminal
*1
Audio input terminal
AVVIDEO PCD-subinputterminal
*1
When the PN-ZB02 (optional) is attached
Input mode Video Audio
PCDVI-D
PC/AVDVI-Dinputterminal
*4
*3
PCHDMI
PC/AVHDMIinputterminal
*2
PCD-SUB
PCD-subinputterminal
*1
PCRGB
PCRGBinputterminals
*5
AVDVI-D
PC/AVDVI-Dinputterminal
*4
AVHDMI
PC/AVHDMIinputterminal
*2
AVCOMPONENT
AVCOMPONENTinputterminals
*5
PCD-subinputterminal
*1
AVS-VIDEO AVS-videoinputterminal
AVVIDEO
AVvideoinputterminal
PCD-subinputterminal
*1
*1 SelecttheterminaltobeusedinD-SUBofINPUT
SELECT.(Seepage26.)
*2 SelecttheterminaltobeusedinHDMIofINPUTSELECT.
(See page 26.)
*3 SelecttheterminalforAUDIOSELECTwhichisusedfor
audio input. (See page 26.)
*4 SelecttheterminaltobeusedinDVIofINPUTSELECT.
(See page 26.)
*5 SelecttheterminaltobeusedinBNCofINPUTSELECT.
(See page 26.)
2. MUTE
Turns off the volume temporarily.
PresstheMUTEbuttonagaintoturnthesoundbacktothe
previous level.
If using the monitor buttons, either hold both
and at the
sametimeorselectMUTEAUDIOfromtheOPTIONmenu.
3. MENU
Displaysandturnsoffthemenuscreen(seepage22).
4. VOL +/- (Volume adjustment)
Pressing
or displaystheVOLUMEmenuwhenthe
menu screen is not displayed.
V OLUME 15
Press or toadjustthevolumeofthesound.
* If you do not press any buttons for about 4 seconds, the
VOLUMEmenuautomaticallydisappears.

Related product manuals