Sharp PRO-60X5FD - Chapter 4. Removing of Major Parts; Removing of Major Parts (PRO-60 X5 FD)

PRO-60/70X5FD
4 – 1
PRO60X5FD
Service Manual
CHAPTER 4. REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS (PRO-60X5FD)
1. Removing of Stand Unit and Rear Cabinet Ass’y.
1. Remove the 4 lock screws and detach the Stand Unit .
2. Remove the 1 lock screw and detach the AC Cord Cover .
3. Disconnect AC wire and detach the AC Cord .
4. Remove the 4 VESA Hole Covers , 9 lock screws and 18 lock screws and detach the Rear Cabinet Ass’y .
Rear Cabinet Ass'y
9
VESA Hole Cover
6
2Stand Unit
1
8
7
4
AC Cord Cover
5
AC Cord
[AC]
[AC]
3