Sharp R-242M User Manual

NOTE:
1. If you press any of the time pads too many times, continue to press until
the desired time appears.
2. Press the STOP/CLEAR pad if you make a mistake during programming.
3. If the electrical power supply to your microwave oven is interrupted, the
display will intermittently show after the power is reinstated.
If this occurs during cooking, the programme will be erased. The time of
day will also be erased.
4. When you want to reset the time of day, follow the above example again.
6
SETTING THE CLOCK
1. To set the 12 hour-clock, hold the POWER LEVEL
/WEIGHT pad down for 3 seconds.
will appear in the display.
2. To set the 24 hour-clock, press the POWER LEVEL
/WEIGHT pad once more after Step 1,
will appear in the display.
for 3 secs. x2 x3
Select the
24 hour clock.
Select the clock
function.
(12 hour clock)
To set the hours press
the 10 MIN pad
twice,
Check the display.
Example:
To set the 24 hour clock to 23:35
x1
and then the 1 MIN
pad 3 times.
x5 x1
x3
To set the minutes
press the 10 MIN
pad 3 times, then...
To change from hours to
mins press the POWER
LEVEL /WEIGHT pad
once.
the 1 MIN pad 5
times.
To start the clock press
the POWER LEVEL/
WEIGHT pad once.
x1
x1 for 3 seconds
x1
There are two setting modes: 12 hour clock and 24 hour clock.

Sharp R-242M Specifications

Power

AC line voltage	230-240V
power consumption	1.24kW
input current	5.4A
output power	800W
microwave frequency	2450MHz

Capacity

oven capacity	20 litres
cooking uniformity turntable diameter	272mm

Weight and Dimensions

weight	13.3kg
outside dimensions	449(W) x 282(H) x 385(D) mm
cavity dimensions	287(W) x 220H) x 311(D) mm