12
CONVENIENT FUNCTIONS
Website: http://www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
The oven will begin to cook for 5 minutes on 100P and then for 16 minutes on 30P.
NOTE: If 100P is selected as the final power level, it is not necessary to input the power level.
x4
x1
Example:
To cook for: 5 minutes on 100P power (Stage 1)
16 minutes on 30P power (Stage 2)
1. MULTIPLE SEQUENCE COOKING:
A sequence of 3 stages (maximum) can be programmed.
2. To input the power level
press the POWER LEVEL
button once.
STAGE 1
1. To enter the cooking time, rotate
the TIME/WEIGHT knob until
the desired time is displayed.
STAGE 2
3. To enter the cooking time, rotate
the TIME/WEIGHT knob until
the desired time is displayed.
x1
5. Press the START/AUTO MINUTE
button once to start cooking.
4. To input the power level press the
POWER LEVEL button 4 times.
x2
AUTO MINUTE enables you:
• To cook on 100P microwave power in multiples of 1 minute.
• To extend cooking time in multiples of 1 minute.
Example:
To cook on 100P for 2 minutes, press the START/AUTO MINUTE button twice.
NOTES:
• The AUTO MINUTE function for direct start, can only be input within 3 minutes after cooking completion, closing
the door or pressing the STOP/CLEAR button.
• The cooking time may be extended to a maximum of 99 minutes.
2. AUTO MINUTE:
To Next Page
Loading...
