EasyManua.ls Logo

Sharp SD-NX10 - System Specifications; General Specifications; MiniDisc, Tuner, and CD Player Specs; Amplifier and Speaker Specs

Sharp SD-NX10
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SD-NX10
– 2 –
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
SPECIFICATIONS
Specifications for this model are subject to change without
prior notice.
SD-NX10
General
Power source
AC 120 V, 60 Hz
Power consumption
54 W
Dimensions MD/CD/tuner unit
Width: 12-9/16" (318 mm)
Height: 8-5/16" (210 mm)
Depth: 3-11/16" (93 mm)
Amplifier unit
Width: 6-5/16" (160 mm)
Height: 8-5/16" (210 mm)
Depth: 5-3/8" (136 mm)
Weight MD/CD/tuner unit
8.2 lbs. (3.7 kg)
Amplifier unit
7.7 lbs. (3.5 kg)
Input/output/terminals MD/CD/tuner unit
Auxiliary input: 500 mV/47 kohms
Digital input (optical)
System output (RCA)
Line output: 500 mV/47 kohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
System control (SD-NX10 amplifier unit only)
Amplifier unit
System input (RCA)
Speakers; 6 ohms
System control (SD-NX10 MD/CD/tuner unit only)
Amplifier
CD player
MiniDisc
Tuner
Amplification system
64fs 1-bit switching
(Remarks:fs = 44.1 kHz)
Output power
Power output (FTC):22 watts minimum RMS per chan-
nel into 6 ohms from 20 Hz to 20
kHz, 2 % total harmonic distortion
Rated power output: 25 W + 25 W at 6 ohms, 1 kHz
Frequency response: 20 Hz - 25 kHz (± 3dB)
Total harmonic distortion: 0.02% at 1 kHz, 1 W
A/D noise shaping
7th-order (delta - sigma) modulation
Type
1-disc slot-in type compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser pickup
D/A converter
1-bit D/A converter
Frequency response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Type
MiniDisc recorder
Signal readout
Non-contact, 3-beam semiconductor laser pickup
Rotation speed
400 - 900 rpm CLV, Approx
Error correction
ACIRC (Advanced Cross Interleave Reed-Solomon
Code)
Quantization
20-bit linear (A/D converter)
Coding
ATRAC (Adaptive TRansform Acoustic Coding),
ATRAC 3
Sampling frequency
44.1 kHz
Recoridng method
Magnetic modulation overwrite method
Frequency response
20 - 20,000 Hz
D/A converter
1-bit D/A converter
Wow and flutter
Unmeasurable (less than 0.001% W. peak)
Signal/noise ratio
95 dB (1 kHz)
Dynamic range
90 dB (1 kHz)
Audio channel
Stereo: 2 channels (SP, LP2, LP4)
Monaural: 1 channel (MONO)
Frequency range
FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
Type
2-way type speaker system
1-3/16" (3 cm) Tweeter
4" (10 cm) Woofer
Maximum input power:
50 W
Rated input power:
25 W
Impedance
6 ohms
Dimensions
Width: 7-3/8" (187 mm)
Height: 16-11/16" (423 mm)
Depth: 7-7/8" (200 mm)
Weight
8.2 lbs. (3.7 kg)/each
CP-NX10

Related product manuals