To Next PageTo Next PageWhy won't my Sharp Dishwasher start?
Your Sharp Dishwasher might not start because the door isn't properly closed. Make sure it's firmly shut. Also, check that the power supply is correctly connected. If you've selected the Delay Start option, refer to the manual section on how to reset it. Finally, if your model has a child lock, consult the manual for deactivation instructions.
How to fix a Sharp SDW6747GS Dishwasher that does not drain properly?
If your Sharp Dishwasher isn't draining properly, check for clogs in the drain. If installed, inspect the air gap. If connected to a disposer, make sure the disposer is empty. Also, ensure the drain hose is properly connected to the sink and not kinked.
Why does water remain in my Sharp SDW6747GS Dishwasher?
If water remains in your Sharp Dishwasher, it's possible that the previous cycle hasn't finished or was interrupted. Select the proper cycle as indicated by the manual.
What to do if my Sharp SDW6747GS Dishwasher is not cleaning dishes enough?
If your dishes aren't getting clean enough in your Sharp Dishwasher, it could be due to several reasons. First, check if the water pressure is temporarily low and use the dishwasher when the water pressure is normal. Also ensure that the inlet water is hot enough and avoid using the dishwasher when hot water is being used elsewhere. Make sure you are loading dishes properly, not too close together. Use fresh detergent in the correct amount, depending on water hardness and the cycle you chose. Select a more suitable cycle for the food soil condition. Finally, ensure that the spray arms are not blocked by items, allowing them to rotate fully.
How to fix spots and filming on dishes in my Sharp SDW6747GS?
If you're seeing spots and filming on dishes from your Sharp Dishwasher, it could be due to several factors. If the water hardness is too high, consider installing a water softener. Ensure you're loading the dishes correctly. Try using fresh rinse aid if your current rinse aid is old or damp. Also, make sure the rinse aid dispenser is full.
What to do if my Sharp SDW6747GS is not drying dishes enough?
If your Sharp Dishwasher isn't drying dishes adequately, check if the detergent dispenser is empty and fill it or increase the amount of rinse aid. Ensure proper loading of dishes. Verify that the selected cycle includes a drying option.
What causes suds in my Sharp Dishwasher?
Suds in your Sharp Dishwasher are likely caused by using the wrong type of detergent. Ensure you are only using automatic dishwasher detergent.
What causes etching on dishes in my Sharp SDW6747GS?
Etching on dishes in your Sharp Dishwasher can be caused by using too much detergent, especially if you have soft water. Also, if the inlet water temperature exceeds 150?, it can cause etching. Lower the inlet water temperature.
Why is there detergent left in the dispenser cup of my Sharp SDW6747GS Dishwasher?
If you find detergent left in the dispenser cup of your Sharp Dishwasher, the detergent may be too old; use fresh detergent. Also, the spray arm might be blocked, so load the dishes making sure the spray arms are not blocked.
What to do if my Sharp SDW6747GS operates too long?
If your Sharp Dishwasher is running for too long, it might be connected to cold water; ensure it's connected to the hot water supply. Also, the cycle time automatically increases on Auto and Normal cycles when heavy soil is detected. If you've selected the Sanitize option, the cycle time will also increase to meet the sanitize temperature requirement.
General| Brand | Sharp |
|---|---|
| Model | SDW6747GS |
| Category | Dishwasher |
| Language | English |
Guide on how to register a new Sharp product for benefits like warranty support and notifications.
Accessing setup, operation information, FAQs, and exclusive content online.
Multiple contact methods for customer assistance, including email and chat.
Information on product model, warranty period, exclusions, and how to obtain service.
Guidelines for safe installation, including water temperature and grounding.
Essential safety measures for operating the dishwasher and handling items.
Visual identification of dishwasher parts and technical specifications.
Explanation of control panel buttons, indicators, and display functions.
Description of available wash cycles like Auto, Heavy Duty, Normal, and Light.
Details on delay start, wash zone, power wash, temperature, and drying options.
Information on status window, error codes, and cycle progress indicator lights.
Features like LED lights and adjustable upper/third racks for loading flexibility.
Description of foldable tines, power wash spray, smart wash system, and filter system.
Overview of how the dishwasher cleans, basic operations, and dish preparation.
Instructions for loading upper and lower racks, and the silverware basket.
Procedure for loading the third rack, adding dishes mid-cycle, and filling dispensers.
Instructions for filling the rinse aid and detergent dispensers.
Details on different wash programs, detergent, water usage, and cycle times.
How selected options affect cycle duration for different wash programs.
Instructions for cleaning the door, control panel, inner tub, and filters.
Cleaning the door gasket, air gap, and steps for protecting against freezing.
Solutions for problems like the dishwasher not starting, not cleaning, or leaking.
Troubleshooting for draining problems, stains, noise, and bad odors in the tub.
Explanation of error codes (E1, E4, E8, E9) and their possible causes.
Correct methods for installing the drain hose to prevent overflow or draining issues.
