Sharp SJ-FP910 User Manual

9
Control panel
Compartment select key
Select key
Press to select ON/OFF of each mode or temperature setting.
Temperature rise sign
Will indicate the rise of inside temperature
caused by power failure or some other
malfunction.
6HHWKHQH[WSDJH
Temperature display
For indicating preset temperature or
ON/OFF of each mode.
Enter key
For entering the setting.
Icons
All modes are “OFF” by a default setting.
Main modes
Energy saving Vacation mode
Express Freezing Plasmacluster
Multi temperature room assisting modes
Express cool Extra cool
Defrost food Cool down
Additional settings
'RRUDODUPRႇ
6RXQGRႇ Control panel lock
At the time of re-power distribution
• When there is a power failure during the operation of
express freezing or ice tray cleaning, the operation is
stopped.
• See “Multi temperature room” about the assisting mode.
• The other settings are the same as before the power
failure.
To light up the control panel
Press the enter key.
The control panel shows the preset temperature of each
compartment and the operating icons.
$OOLFRQVGRQRWWXUQRQEHFDXVHDOOPRGHVDUH³2))´
by a default setting.)
*
< Standby display >
* The temperature is not indicated on the display while
one of assisting modes in operation.
Note
• Press the keys with your bare hand to operate.
Operation with wet hand is invalid.
• Operation is not accepted while the door* is opened.
• When there is no operation for 1 minute, the display
automatically returns to the standby display. Thus if
there is no operation for another 1 minute, the display
WXUQVRႇ
• Every time you open the door*, the control panel lights
up to show the current setting.
2QO\UHIULJHUDWRUGRRUDQGOHIWIUHH]HUGRRU

Sharp SJ-FP910 Specifications

General

Brand	Sharp
Model	SJ-FP910
Category	Refrigerator
Language	English