SJGF60XT
20
<Example of button operations and self-diagnosis display>
* During self-diagnosis mode input, the “current” fault is displayed.
・
・
・
・
・
・
・
・
・
[During mode input]
“Current” fault
Display of the fault
at the top of Table 1
Press [▲].
Press [▼].
Press [▲].
Press [▼].
Display of the fault at
the second top of Table 1
Display of all faults
that have occurred
Press
[メニュー決定].
Press
[メニュー決定].
Press
[メニュー決定].
“Current” fault history
Press
[メニュー決定].
Press
[メニュー決定].
Press
[メニュー決定].
Display of the
latest fault
Display of the
second latest fault
Press [▲].
Press [▼].
Press [▲].
Press [▼].
Press [▲].
Press [▼].
Press [▲].
Press [▼].
Display of up to 9 items Display of up to 9 items
“1-day before”
fault history
“2-day before”
fault history
Display of the
last fault
Display of the fault just
before the last
“3-days before”
fault history
“4-days before”
fault history
* During forward/reverse scroll of fault display with [▼]/[
▼
] button, if fault data to be displayed next does not exist,
the buzzer sounds “beep-beep”, and the display will not change.
* To display a fault occurrence date for currently displayed data, press the [
冷凍･温度
] lamp.
Fault occurrence date [
冷凍･温度
] lamp.
Current Unlit OFF
Today Lit ON
1-day before Blink once. Repeat "2-sec. OFF"/"0.5-sec. ON/0.5-sec. OFF".
2-days before Blink twice. Repeat "2-sec. OFF"/"0.5-sec. ON/0.5-sec. OFF" twice.
3-days before Blink three times. Repeat "2-sec. OFF"/"0.5-sec. ON/0.5-sec. OFF" three times.
4-days before Blink four times. Repeat "2-sec. OFF"/"0.5-sec. ON/0.5-sec. OFF" four times.
Example of lamp indication: “2-days before”
0.5-sec. 0.5-sec. 0.5-sec. 0.5-sec. 0.5-sec. 0.5-sec. 0.5-sec. 0.5-sec.
2-sec. pause 2-sec. pause
Repeat
ON
OFF
To Next Page
Loading...
