SJGF60XT
29
Pull out the pipe cover.9.
□ : claw
Pipe cover
FREEZER COMPARTMENT / ICE COMPARTMENT DISASSEMBLY3.
Main component Contained parts
Ice maker ass'y T-SK Ice maker thermistor, Ice maker ass'y, Ice cube heater, I-grill, Ice sensor, Ice cube maker
C-part. FI-FK Proximity switch
EV cover ass'y F-thermistor, DEF thermistor, Fan motor F
Heater -
DEF thermistor holder ass'y
(In vicinity of evaporator)
Thermo. fuse ass'y, DEF2 thermistor
Remove the accessories (cases and shelves of 1.
freezer compartment and vegetable compartment).
Remove the SW cover. •
(When replacement of F-LED PWB ass’y)
SW cover
Remove the Ice maker ass'y T-SK2.
.
Remove the screw and pull it toward you while 1)
pressing the claw on the front.
Remove connector.2)
Ice maker ass'y T-SK
□ : claw
Screw
Remove the damper.10.
Damper
CAUTION: Precautions for handling the ice maker ass'y T-SK
Securely insert the 4 claws. If the claws are not •
inserted completely and they come loose,the ice
maker ass'y T-SK could fall down during ice cube
release or it could sag down and make contact with
the ice storage box.
When connecting the connectors, make sure there •
are no connector insertion problems.
Remove the C-part. FI-B.3.
Remove the screw, and pushing the C-part. from
the left side to release the claw at the front.
Screw
C-part. FI-B
Claw
To Next Page
Loading...
