Sharp SJ-GF60X-T

SJGF60XT
32
HOW TO INSTALL R-SUB PACKING6.
Attach the R-sub packing sealer to the R-door L-ass'y only.1.
Provide a clearance so that the R-sub packing sealer will not protrude from the door packing.
(The hole edge is the reference position.)
Reference
Reference
Center
Center
Hole
Top enlarged view
Bottom enlarged view
Hole
R-sub packing sealer
R-sub packing sealer
R-door L-ass’
y
Fasten the R-sub packing with the claws of the R-door ass’y (front: 8 places, back: 6 places). First, claw either 2.
top or bottom of the packing to fasten it, and then claw the remaining points in sequence.
(The figure below shows R-door L-ass'y.)
: Claw
Make sure that a certain
clearance is provided so
that the R-sub packing
will not protrude from
the door packing.
Claw
R-sub packing
R-door packing