SJGF60XT
46
Attach A-sealer D-damper A and B.2.
Attach A-sealer D-damper A and B to the D-damper flap.•
D-damper flap
A-sealer d-damper B
A-sealer d-damper A
D-damper flap
When attaching A-sealer D-damper B,
do not cover the rib of the D-damper flap
periphery.
When attaching A-sealer D-damper A,
do not cover the rib of the D-damper flap
periphery.
Mount the assembly of Step 2 to the D-damper holder.3.
D-damper flap
D-damper flap
D-damper flap
D-damper holder
Motor
Screw
(Check the looseness of the screw.)
Screw
(Check the looseness of the screw.)
Fit the projection of the D-damper flap
in the hole of the D-damper holder.
Fit the projection of the motor
in the hole of the D-damper flap,
and fasten it with the screw.
Mount the assembly of Step 1, D-PCI cover, O-catalyzer, absorbent rubbers A and B, Indicator PWB and 4.
Plasmacluster unit to the D-PCI box ass’y.
The projection of absorbent rubber A is fit
in the hole of the D-fan motor PCI.
Indicator PWB
O-catalyzer
Absorbent
rubbers A
Absorbent
rubbers B
Plasmacluster unit
Absorbent
rubbers A
Absorbent
rubbers B
D-PCI box ass’y
D-fan motor PCI
D-PCI cover
To Next Page
Loading...
