SJGF60XT
51
Bundle the harness with the L band C and fix it to the I-grill.9.
(1) Bundle the ice maker thermistor and the protective tube of the ice cube heater with the L band C and fi x them to
the I-grill.
Align the end face of the protective tube, and tie the L band C up at the front of the marking (black band) of the ice •
heater cover T.
(2) Fix the ice maker ass'y and the harnesses of the ice maker thermistor and ice cube heater with the L band C.
Make sure that the harnesses of the thermistor and heater are not too loose.•
L band C
Make sure that protective tube is covered by the heater cover.
L band C
I-grill
55±5
Marking of the ice heater
(2)
(1)
Fix the harness cover to the I-grill with screws.10.
Make sure that the ice maker ass'y does not pinch the harnesses.•
Screw
Harness cover
To Next Page
Loading...
