Sharp SM-207H - Page 16

Press the SIDE A/SIDE B
SIDE A/SIDE B button,
o9 The unit will start playing
@ from the first programme on
the reverse side. When the unit
is in the “both sides’’ play
\ mode, the side currently playing
: \ will be played again after
<< playing the reverse side is
finished. :
the record will continue to revolve.
It may take some time to hear the playing sound.
To Change Record Speed
Press the ¥% ¥ CUE button to stop playing for brief periods;
To start playing again, press the ¥ ¥ CUE button once more.
@ Do not do the above operation repeatedly within one second.
The
record
speed
is
automatically
set
at
33
rpm
for
30
cm.
(12")
or
25
cm
(10”)
LP
records
and
at
45
rpm
for
17cm.
(7"')
EP
records.
For
45
rpm
LP
records
or
33
rpm
EP
records
press
the
SPEED
(33/45)
button
and
select
the
correct
speed
before
pressing
the
</m
PLAY/CUT
button.
:
PLAY/CUT
Press the </m PLAY/CUT
button.
@ Even if a record which has more than eight programmes on
one side is placed on the turntable, programme numbers are
displayed at most 7”.
e Depending on the record, final transfer groove can be counted
as a programme and programme number display, and the -
APMS indicators will indicate more than real numbers of the
programme on the record: ‘
eAfter the last programme is played, the record is stopped
automatically, if the unit is in the ‘‘one side’ play mode, after
playing one side is finished and if it is in the ‘both sides’’
play mode, after playing both sides is finished, the unit will
stop automatically.
Press the <4 FWD
button;
@ For 30 cm. (12’') LP
records, press once.
Follow the operation as
described on page 14,
steps 1 to 3.
30cm. (12’’) LP records
e@ For 17 cm. (7"’) EP
records, press three
e@ For 25cm. (10) LP :
times.
records, press twice.
The third time has to
be pressed about three
seconds after the second
time it is pressed.
peg eg pe neg =o
25cm. (10’') LP records 17cm. (7"') EP records
Press they ¥ CUE button
and the record will play
from the beginning.
©
After
the
above
process
has
been
completed
once,
the
unit
remembers
the
size
of
the
record;
it
can
be
played
again
by
pressing
the
<«/a
PLAY/CUT
button,
as
long
as
the
POWER
switch
is
not
turned
into
the
Jf
OFF
position,
and
the
turntable
compartment
is not opened.
om
LE)
'
15