Sharp SM-207H - Page 23

Begin playing the source
“to
be
recorded.
Follow
steps
1
to
3
as
@The
desired
broadcast
given
in
‘Recording
can
be
received
(see
the
from
the
Records”
on
* operation manual of page 21.
> the stereo tuner).
e@To record a source
from other unit, press
) the CD.or AUX button
of the amplifier and set
the unit in play mode.
RECORD LEVEL
ow oat
a
@ oioousgouD
fF peepooooed
&t
When recording music from the tuner or external unit, etc.,
if a 4- to 5-second space is made between each programme,
this will allow operation of the APSS, APMS or introduction
scan playback features. .
1 Slide the RECORD LEVEL control to the “0” position
L
during recording at a point suitable for selection editing.
eWhen not doing a synchro-
nized recording of a record
and recording from the RP-
207H, follow the procedure
at left.
Press the » button to
begin recording.
Usually the RECORD LEVEL control is set at ‘5’ position in
which the recording level is kept almost appropriate. If, how-.
ever, that position does riot give a proper recording level, adjust
the RECORD LEVEL contro! to light on and off the ‘0 dB”
indicator of the level meter.
Record Level Balance Control
Normally set to the centre position.
If the right and left channels are different, adjust with the
BALANCE control.
2
After
sufficient
editing
time
(for
about
5
séconds)
has
elapsed,
press
the
i
button.
The
space
is
now
edited
onto
the
cassette
tape
recording.
3
Slide
the
RECORD
LEVEL
control
to
the
original
posi-
tion
and
begin
recording
of
the
next
selection.
When
a
tape
that
has
already
been
recorded
on
is
used
to
record
anew,
the
formerly
recorded
section
or
sections
will
be
erased
automatically.
To
erase
a
recorded
tape
without
recording
anything
else
on
it,
the
following
procedure
is
used:
1
Insert
a
cassette
tape
to
be
erased
into
the
cassette
compart-
ment
of
Deck
2.
2 Press the @ button.
3
Set
the
RECORD
LEVEL
control
to
the
“0’’
position.
4 Press the >» button to begin erasing.
~TAPE_COUNTER
lofofo}
The
tape
counter
is
set
at
“000”
by
pressing
the
reset
button
next
to
the
counter
at
the
beginning
of
each
cassette,
the
number
displayed
at
the
beginning
of
each
recorded
segment
can
be
noted
to provide
a
convenient
tape
index.
The tape counter functions for Deck 2 only.
N N