Sharp SM-207H - Page 8

TAPE SELECTOR lf the TAPE SELECTOR switch is set to the AUTO position,
AUTO, METAL the tape type (METAL, CrO, or NORMAL] will be auto-
matically selected for proper recording and playback by
simply placing the tape in the Cassette compartment.
iO
NORMAL (Low-Noise) tape METAL tape
THE TAPE TYPE IS DISPLAYED
ON THE TAPE !NDICATORS.
LZ O Dy =
No detection hole Detection hole B oO oO a ie
; Detection hole A METAL
CrO, tape => 0 0D
@Some tape manufacturers do = oO O =
not provide detection hole B for METAL | — Croe
METAL tapes. If you are using 7Croz {0 OD
this type of tape, you must set Sid oOo}
the TAPE SELECTOR switch to
Datation hile METAL, otherwise the tape NORMAL a O worn
indicator will display CrO, . = <——
Note: :
The TAPE SELECTOR switch functions only for Deck 2. In Deck 1, even
if the TAPE SELECTOR switch is set to the METAL position, the tape type
is automatically changed by the AUTO TAPE SELECTOR feature.