Figures 4, 5 and 6 contain many Microwave Drawer measurements
for reference when planning the drawer’s location.
This Microwave Drawer can be installed below any electric or
gas wall oven.
30" mICRoWAvE dRAWER mEASUREmENtS
A
B
C
D
E
F
G
H
I
J
K
L
M
M
N
O
P
Q
R
A. 84" wall cabinet
B. Optional wall oven cutout illustrated in sketch
C. Suggested electrical outlet location*
D. 6"
E. Anti-Tip block
F. 3 -1/2"
G. 5"
H. 4"
I. 2" minimum
J. 28-7/16" opening
K. Allow 3/16" overlap
L. 14-13/16" to bottom of Anti-Tip block
M. Allow 3/4" overlap
N. 23-1/2" minimum depth
O. 15-9/16" opening
P. Allow 7/16" overlap
Q. Floor must support 100 lb
R. 30" cabinet minimum
* Can also be installed using an electrical outlet in an adjacent
cabinet within the area where the provided electrical cord can
reach. Power cord access hole in cabinet should be a minimum
1
1
/2" diameter hole and deburred of all sharp edges.
IMPORTANT
Always allow sufcient power cord length to the
electrical outlet to prevent tension.
Always check electrical codes for requirements.
Cutout Dimension 28
7
/16" x 15
9
/16"
To Next Page
Loading...
Need help?
General
