Sharp TU-GD10U-T - Video Signal Adjustment Procedure

29
TU-GD10U-T
TU-45GAD/T
LC-45GX6U/D/T
3. Video signal adjustment procedure
(1) Preparation for analog adjustment
Signal generator level adjustment check (Adjustment to the specified level)
» Composite signal : 0.714Vp-p ± 0.02Vp-p (Pedestal to white level)
» 15K component signal : Y level : 0.714Vp-p ± 0.02Vp-p (Pedestal to white level)
PB, PR level : 0.7Vp-p ±0.02Vp-p
» 33K component signal : Y level : 0.7Vp-p ± 0.02Vp-p (Pedestal to white level)
PB, PR leve l: 0.7Vp-p ±0.02Vp-p
» DVI-I (analog RGB) signal : RGB level : 0.714Vp-p ± 0.02Vp-p (Pedestal to white level)
(2) N358 composite signal adjustment (Main and Sub)
Adjustment item Adjustment conditions Adjustment procedure
1 Adjustment
2 Auto adjustment
performance
Feed the split field color bar signal (75% color saturation) to VIDEO 1
input.
Feed the RF signal (by use of US-10ch) to TUNER-A and TUNER-B.
Bring the cursor on [ËN358 ALL ADJ] and press [ENTER].
[ËN358 ALL ADJ FINISH] appears when finished.
[Video input signal] [US-10CH]
↑100% white ↑100% white
Adjustment item Adjustment conditions Adjustment procedure
1 Adjustment 525i signal
2 Auto adjustment
performance
Feed the 100% color bar signal to VIDEO 1 component input.
Bring the cursor on [ËCOMP 15K ALL ADJ] and press [ENTER].
[ËCOMP 15K ALL ADJ FINISH] appears when finished.
(3) Component 15K signal adjustment (Main and Sub)
↑100% white