PROGRAMMING MANUAL
CODE: 00ZUP3300UPME
POS TERMINAL
MODEL UP-3300
(For "U" and "A" version)
SHARP CORPORATION
CHAPTER 1. PROGRAM RESET and SRV mode . . . . . . . . . . . . . . . . . . . . . . .1
CHAPTER 2. MASTER RESET (All Memory Clear) . . . . . . . . . . . . . . . . . . . . . .2
CHAPTER 3. READING OF SRV MODE PROGRAM . . . . . . . . . . . . . . . . . . . .5
CHAPTER 4. SRV MODE PROGRAMMING ("2 SETTING") . . . . . . . . . . . . . .10
CHAPTER 5. SRV MODE PROGRAMMING ("3 IRC SETTING") . . . . . . . . . .37
* For setting in USER PROGRAMMING mode, refer to the Reference Manual
which is Provided with each UP3300.
CONTENTS
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
To Next Page
Need help?
General
