CHAPTER1. PROGRAM RESET and
SRV mode
In the UP-3300, the following reset switch (location No: S1) is used to
switch to the service (SRV) mode and to reset.
PROGRAM RESET
Used to return the machine back to its operation state after a lock up
has occured.
PROCEDURE
1) Turn off the AC switch.
2) Set the reset switch to "ON" position.
3) Turn on the AC switch.
4) Set the reset switch to "OFF" position.
5) The reset menu windowis displayed as shown below.
DISPLAY:
Touch the [PROGRAM RESET] key.
6) PROGRAM RESET is started.
7) After completion of the program reset, the SRV mode is displayed
as shown below.
DISPLAY:
[SRV mode screen]
MRS Switch
ON OFF
MRS Switch
Please select
PROGRAM RESET MASTER RESET
– 1 –
To Next Page
Loading...
