CHAPTER 4. SRV MODE
PROGRAMMING
("2 SETTING")
DISPLAY: SRV mode screen
Select "2 SETTING" and press the ENTER key.
DISPLAY: SETTING item selection screen
Select the desired item, press the ENTER key.
The item setting input screen is displayed.
1. [1 DEVICE ASSIGN]
DISPLAY: Setting item select screen
Select "1 DEVICE ASSIGN" and press the ENTER key.
DISPLAY: DEVICE ASSIGN select screen
Select the item to be changed and press the ENTER key.
The setting content is described on Page 11.
– 10 –
To Next Page
Loading...
