Sharp UP-3300 - Page 20

[JOB#923] : MRS=0010 : INLINE PROGRAMMING
AREA
923-A,B: 1. The record number for REQUEST of T-LOG POLLING
(x100)
1. The record number for REQUEST of T-LOG
POLLING (x100)
923-AB
0000 ∼ 9900 00-99
Explanation for satellite:
Ex: When AB=10 The satellite will request to the master to poll the
T-log when the T-log records exceed 1,000.
923-C: 1. T-log Function
1. T-log Function 923-C
No 0
Yes 1 ★
923-D: 1. Polling cycle (second)
1. Polling cycle (second) 923-D
0 ∼ 9 Sec. 0 ∼ 9
[JOB#924] : MRS=1433 : INLINE PROGRAMMING
AREA
924-A,B,C: Not used (Fixed at “143”)
924-D: Programming whether or not to lock REG-mode entries
after individual periodic total resetting
1. Locking after Daily Net resetting
2. Locking after Transaction resetting
1. Locking after Daily
Net resetting
2. Locking after
Transaction resetting
924-A
Yes
Yes 0
No 1
No
Yes 2
No 3 ★
[JOB#925] : MRS=0303 : INLINE PROGRAMMING
AREA
925-A: Not used (Fixed at “0”)
925-B: 1. Various individual resetting
1. Various individual resetting 925-B
Disable 2
Enable 3 ★
925-C: 1. Report printing when consolidation daily and periodic
transaction reading or resetting is taken
1. Report printing when consolidation daily and
periodic transaction reading or resetting is taken
925-C
Printing of both i.e. reports on individual machines
and consolidation report on the entire system
0 ★
Printing of consolidation report on the entire system 1
Printing of report on individual register 2
925-D: 1. Resetting is allowed when the server is remained sign on
2. Resetting in the open store state
1. Resetting is allowed when
the server is remained sign on
2. Resetting in
the open
store state
925-D
No
Disable 0
Enable 1
Yes
Disable 2
Enable 3 ★
[JOB#926] : MRS=0000
926-A: 1. Printing “LAST VOID DATA” on KP.
2. Printing “PAST VOID DATA” on KP.
1. Printing “LAST VOID
DATA” on KP.
2. Printing “PAST VOID
DATA” on KP.
926-A
Both are printed
Both are printed 0 ★
Both PAST VOID DATA
and voided item aren’t
printed
1
Both LAST VOID DATA
and voided item aren’t
printed
Both are printed 2
Both PAST VOID DATA
and voided item aren’t
printed
3
926-B: 1. Sending “REFUND DATA” on KP.
2. Server Sign-on/off sign on/off of CAT terminal.(for CAT1
setting).
1. Sending “REFUND
DATA” on KP.
2. Server Sign-on/off
sign on/off of CAT
terminal.(for CAT1
setting).
926-B
Yes
No 0 ★
Yes 1
No
No 2
Yes 3
926-C: 1. Open store / Close store : standalone POS with on-line
2. Send AT command string with OPEN STORE
3. Send AT command string with CLOSE STORE
1. Open store /
Close store :
standalone
POS with on-line
2. Send AT
command
string at
CLOSE
STORE
3. Send AT
command
string at
OPEN
STORE
926-C
No
No
No 0 ★
Yes 1
Yes
No 2
Yes 3
Yes
No
No 4
Yes 5
Yes
No 6
Yes 7
926-D: Not used (Fixed at "0")
[JOB#927] : NOT USED MRS=0000
[JOB#928] : MRS=0060
928-A,B: Not used (Fixed at “00”)
928-C: 1. Printing of PLU on bill when it is 0
2. Printing of text for associated PLU in COMBO MEAL on
bill.
1. Printing of PLU
on bill when it is 0
2. Printing of text for
associated PLU in
COMBO MEAL on bill.
928-C
Yes
Yes 0
No 2
No
Yes 4
No 6 ★
– 19 –