4. [4 GT]
DISPLAY: Setting item select screen
Select "4 GT" and press the ENTER key.
DISPLAY: Z REPORT COUNTER screen
Select the GT to be changed and enter the value
The content of displayed GT are as listed in the table
below.
DISPLAY TEXT CONTENTS MRS
POSITIVE GT GT2 (Positive GT) : Max.13 digits 0.00
NEGATIVE GT GT3 (Negative GT) : Max.13 digits 0.00
TRAINING GT TRAINING GT: Max.13 digits 0.00
GT1 is obtained by the following equation.
EQUATION: GT1 = GT2
∼ GT3
NOTE: GT programming will be inhibited after MRS3 operation.
JOB#989 memory initial can be executed after MRS3 opera-
tion.
5. [5 MODE SECRET#]
DISPLAY: Setting item select screen
Select "5 MODE SECRET #" and press the ENTER key.
DISPLAY: MODE SECRET# screen
Select the mode to be changed and enter the value
The content of displayed secret# are as listed in the table
below.
TEXT CONTENTS MRS
OP XZ MODE OP X/Z MODE SECRET CODE (4 DIGITS) 0000
X1 MODE X1 MODE SECRET CODE (4 DIGITS) 0000
Z1 MODE Z1 MODE SECRET CODE (4 DIGITS) 0000
X2 MODE X2 MODE SECRET CODE (4 DIGITS) 0000
Z2 MODE Z2 MODE SECRET CODE (4 DIGITS) 0000
PRICE MODE PRICE MODE SECRET CODE (4 DIGITS) 0000
PGM1 MODE PGM1 MODE SECRET CODE (4 DIGITS) 0000
PGM2 MODE PGM2 MODE SECRET CODE (4 DIGITS) 0000
AUTO KEY
PGM
AUTO KEY MODE SECRET CODE
(4 DIGITS)
0000
REG MODE REG MODE SECRET CODE (4 DIGITS) 0000
START UP START UP SECRET CODE (4 DIGITS) 0000
*
If “0” is entered “compulsory secret code entry” is canceled.
– 21 –
To Next Page
Loading...
