6) The master reset menu window is displayed as shown below.
DISPLAY:
Touch the [MASTER RESET 2] key.
7) The secret number input window is displayed as shown below.
DISPLAY:
Enter the secret number for the MASTER RESET-2 and touch
the [ENTER] key.
Secret number for MRS-2: 22222222
8) Set the fixed keys in the table below (Start from the [HOME] key,
The key are displayed sequentially)
DISPLAY:
No. KEY NAME
1 HOME
2 CANCEL
3CL
4 MODE
5UP ( ↑ )
6DOWN ( ↓ )
9) MASTER RESET-2 is started.
DISPLAY:
10) After completion of the master reset, the buzzer sounds three
times and the following SRV mode display is shown.
DISPLAY:
[SRV mode screen]
3. MRS-3 (Master resetting 3): Master
resetting 3: Master resetting 3 requires
the entry of Serial No. in addition to
master resetting 1.
After complete the MRS3, following operations and programming will
be inhibited.
1. GT programming.
2. All Memory Download via RS-232C and IR.
3. GT resets with Z report. (Z report can be made, but GT will not be
reset.)
PROCEDURE
1) Turn off the AC switch.
2) Set the reset switch to "ON" position.
3) Turn on the AC switch.
4) Set the reset switch to "OFF" position.
5) The reset menu windowis displayed as shown below.
DISPLAY:
Touch the [MASTER RESET] key.
MASTER RESET
Please select
MASTER RESET 1
MASTER RESET 2
ENTER PASSWORD
ENTER
CLEAR
0
1
4
7
00
2
5
8
CANCEL
3
6
9
ENTER HOME
MASTER RESET
Please select
PROGRAM RESET MASTER RESET
– 3 –
To Next Page
Loading...
