Sharp UP-600 Programming Manual

[01 DEVICE CONFIG] - [05 KP#1] / [06 KP#2] / [07 KP#3]
[08 KP#4] / [09 KP#5] / [10 KP#6]
[11 KP#7] / [12 KP#8] / [13 KP#9]
DISPLAY: Setting screen
[KITCHEN PRINTER] KP#1-KP#9
DISPLAY CONTENTS SELECT ITEM MRS NOTE
TERMINAL# Terminal No. 000-254 000 000 : Self terminal No.
This means local device.
1-254: Except self terminal No.
This means re-routed device.
The built-in printer cannot be re-routed.
Re-routing programming is only valid for printer.
CHANNEL# Channel No. 0-7 0 0: No RS232 channel is assigned.
1-7: RS232 channel is assigned.
PRINTER Connected printer name TM-T88/85 TM-T88/85 In case of "BUILT-IN" :
The printing method is according to "R/J
PRINTER" programming. (AUTO CUTTER and
LOGO are used the programming data of
"REPORT PRINTER)
TM-300
TM-U210
TM-T88 (2)
BUILT-IN
TM-T80
AUTO CUTTER Aito cutter function NO NO
YES
LOGO TEXT Logo text print PRINT PRINT Logo text and its format is same as Receipt.
If a printer is set as "TM-T88 (2) ", its STAMP
can be printed.
NOT PRINT

Sharp UP-600 Specifications

General

Brand	Sharp
Model	UP-600
Category	Cash Register
Language	English