Sharp UP-600 Programming Manual

[01 DEVICE CONFIG] - [19 COIN DISP.] DISPLAY: Setting screen
[COIN DISPENSER]
DISPLAY CONTENTS SELECT ITEM MRS NOTE
CHANNEL# Channel No. 0-7 0 0 : No RS232 channel is assigned.
1-7 : RS232 channel is assigned.
[01 DEVICE CONFIG] - [20 ONLINE] DISPLAY: Setting screen
[ONLINE]
DISPLAY CONTENTS SELECT ITEM MRS NOTE
CHANNEL# Channel No. 0-7 0 0: No RS232 channel is assigned.
1-7: RS232 channel is assigned.
NOTE: 1. Set the channel No. so that it does not conflict with other devices that are to be connected. If it does, the unit won’t operate normally.
2. Do not use channel No. 2 for the modem. Use other channel Nos.
[01 DEVICE CONFIG] - [21 CVM DATA I/F] DISPLAY: Setting screen
[CVM DATA I/F]
DISPLAY CONTENTS SELECT ITEM MRS NOTE
TERMINAL# Terminal No. 000-254 000 000 : Self terminal No.
This means local device.
1-254 : Except self terminal No.
CHANNEL# Channel No. 0-7 0 0 : No RS232 channel is assigned.
1-7 : RS232 channel is assigned.

Sharp UP-600 Specifications

General

Brand	Sharp
Model	UP-600
Category	Cash Register
Language	English