Sharp UP-700 - POS Terminal Components; External View Description

NETWORKED TERMINALS (TERMINALS IN IRC)
***SYSTEM X & SYSTEM Z REPORTS MAY ONLY BE TAKEN FROM THE MASTER
TERMINAL (TERMINAL 1).***
X REPORTS (READING)
o TURN KEY TO “X1/Z1” POSITION
o TOUCH 4 “SYSTEM X”
o TOUCH ENTER KEY
o SELECT REPORT YOU WISH TO PRINT
o TOUCH ENTER KEY
• SOME REPORTS (PLU, DEPT) WILL REQUIRE A RANGE INPUT. EDIT
THE RANGE IF YOU WISH OR JUST PRESS THE ENTER KEY THROUGH
THE DEFAULTS.
• SOME REPORTS (TRANSACTION) WILL REQUIRE A CHOICE OF
WHAT TERMINALS TO X OUT. SELECT “ALL” OR “MACHINE SELECT”
FOR INDIVIDUAL TERMINALS.
o AFTER PRINTING PRESS CANCEL KEY TO RETURN TO MAIN REPORT
MENU
o TURN KEY TO “REG” POSITION
Z REPORTS (RESETTING)
o TURN KEY TO “X1/Z1” POSITION
o TOUCH 5 “SYSTEM Z”
o TOUCH ENTER KEY
o SELECT REPORT YOU WISH TO PRINT
o TOUCH ENTER KEY
• SOME REPORTS (PLU, DEPT) WILL REQUIRE A RANGE INPUT. EDIT
THE RANGE IF YOU WISH OR JUST PRESS THE ENTER KEY THROUGH
THE DEFAULTS.
• SOME REPORTS (TRANSACTION) WILL REQUIRE A CHOICE OF
WHAT TERMINALS TO Z OUT. SELECT “ALL” OR “MACHINE SELECT”
FOR INDIVIDUAL TERMINALS.
o AFTER PRINTING PRESS CANCEL KEY TO RETURN TO MAIN REPORT
MENU
o TURN KEY TO “REG” POSITION