Sharp UP-810F - Device Config - 2. Journal Printer; Device Config - 3. External Journal; Device Config - 4. Receipt Printer; Device Config - 5. Bill Printer

UP-810F/820N/820F(U) SRV MODE PROGRAMMING (“SETTING”)
3 – 2
DEVICE CONFIG - 2. JOURNAL PRINTER
DEVICE CONFIG - 3. EXTERNAL JOURNAL
* External Journal cannot print if program on same channel with other printer (Journal, Receipt, Report printer, etc).
DEVICE CONFIG - 4. RECEIPT PRINTER
* Receipt prints each data at “Buffering”. Receipt printer is fixed to “Built-in printer”.
DEVICE CONFIG - 5. BILL PRINTER
DISPLAY CONTENTS SELECT ITEM MRS NOTE
TERMINAL# Terminal Number 0-254 0 0: SELF TERMINAL No.
This means local device.
1 - 254: (EXCEPT SELF TERMINAL NO.)
This means re-routed device.
Re-routing programming is only valid for
printer.
CHANNEL# Channel Number 0 - 4 0 “0” means no RS-232 channel is assigned.
PRINTER Kind of printer TM-T88 (3)/
T88 (4)
UP-820:
BUILT-IN
UP-810:
TM-T88 (3)
/T88 (4)
About the usage of TM-T88 (3):
POS dose not use the Graphic LOGO function
with the journal printer function.
TM-U220/230
BUILT-IN
TM-T90
DISPLAY CONTENTS SELECT ITEM MRS NOTE
CHANNEL# Channel Number 0 - 4 0 “0” means no RS-232 channel is assigned.
PRINTER Kind of printer TM-T88 (3)/
T88 (4)
TM-T88 (3)
/T88 (4)
About the usage of TM-T88 (3):
POS dose not use the Graphic LOGO function
with the journal printer function.
TM-U220/230
TM-T90
DISPLAY CONTENTS SELECT ITEM MRS NOTE
AUTO CUTTER Auto cutter YES YES
NO
TRAY ST FEED# Tray ST feed line 0 - 9 0 Only receipt printer’s programming.
DISPLAY CONTENTS SELECT ITEM MRS NOTE
TERMINAL# Terminal No. 000 - 254 000 000 : Self terminal No.
This means local device.
1-254: Except self terminal No.
This means re-routed device.
Re-routing programming is only valid for printer.
CHANNEL# Channel No. 0 - 4 0 0: No RS-232 channel is assigned.
PRINTER Kind of printer TM-295
(EPSON)
TM-295
(EPSON)
TM-T88 (3) /
T88 (4)
TM-T88 (3) /
T88 (4)+LOGO
TM-U220/U230
BUILT-IN
TM-T90
AUTO CUTTER Auto cutter YES NO This item is not valid for TM-295
NO
INITIAL FEED# Initial SLIP feed line number 00 - 64 00 This item is not valid for TM-295
SLIP MAX LINE Slip print maximum line No. 00 - 99 99 This item is not valid for TM-295