20
Dimensions: 257 ⳯ 182 mm
FLE (M) Sdn. Bhd.VC-A420U (16-20)
ß / ©
Adding Channel Memory/Erasing Channel Memory
Use this function to manually add or erase channels to/from the memory.
Setting the Channels
SET UP
MENU
ENTER :SET EXIT :MENU
CHANNEL PRESET
SELECT :
CLOCK
LANGUAGE
TIMER
佡
∂
ƒ
佡
! Select the channel to be added with the numbered buttons and the channel to be erased with
the CH ∂/ƒ or numbered buttons.
@ Press MENU. Select “CHANNEL PRESET” with ∂/ƒ and
press SET.
# Select “CH SET” with ∂/ƒ and then select “MANUAL”
with ß/ ©. Then press SET.
$ Select “ADD” if you want to add the channel memory or
“ERASE” if you want to erase the channel memory with
ß /©.
% Press MENU to return to the normal screen.
AIR/CATV AIR CATV
CHANNEL PRESET
CH SET AUTO MANUAL
∂
ƒ
ß
©
佡
CHANNEL SELECT :
ADD 03
ADD/ERASE :
EXIT :MENU
[ADD]
[ERASE]
ERASE 03
Normal
Screen
佡
• If the power is interrupted for more than 5 seconds, the channel memory may be erased. If this happens, reset the channels
again and reset AIR/CATV selection.
• If a button is not pressed within 3 minutes during the setting procedure, the screen will return to normal.
To Next Page
Loading...
