11
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
FAST FORWARDING/REWINDING A VIDEO TAPE (VC-MH703HM/
VC-MH713LM)
1.
Press STOP ( ) to stop the video tape.
2. Press FAST FORWARD ()/REWIND ( ) on the remote control or turn the
shuttle ring on the VCR fully to the Right for Fast Forward and fully to the Left for Rewind
and Release.
3. To stop fast forward/rewind, press STOP ().
FORWARD/REVERSE VISUAL SEARCH
1.
During playback for continuous search mode, press FAST FORWARD ()/
REWIND ( ) on the remote control, or turn the shuttle ring fully to the Right for
Forward Visual Search or fully to the Left for Reverse Visual Search then Release. (On
release the shuttle returns back to starting position). Press
PLAY/X2 ( ) to resume
playback.
OR
2. To decrease the speed, during visual search mode press FAST FORWARD ()/
REWIND ( ) again, or turn and hold the shuttle ring halfway to the Right for Forward
Visual Search or Left for Reverse Visual Search. Release the shuttle to resume playback or
If the remote control was used press
PLAY/X2 ().
NOTE:
• There will be picture interference and possibly a change to black and white picture
using Visual Fast Forward/Rewind functions.
REC
PAUSE/STILL
REW FF
PLAY / X2
STOP
Remote Control
TINS-3776 ENGLISH.book Page 11 Thursday, May 25, 2000 4:18 PM
To Next Page
Loading...
