26
If problems persist contact the SHARP Helpline on tel: 0990-274277
ADVANCED OPERATION
RECORDING FROM OTHER EQUIPMENT
VC-M303LM
You can record video and audio signals from various external sources, such as a camcorder,
onto a video tape using your VCR.
For example, recording from a camcorder connected to LINE 2 IN/DECODER on your VCR:
1.
Connect your signal source (eg. Camcorder,
Digital Camera etc) to the desired scart socket
on the back of the VCR using the manufacturers
recommended cable (not supplied).
2.
Ensure that the tape on which you wish to record
is inserted into the VCR.
3.
Press
INPUT SELECT
on the remote control
until the VCR display shows
AV
.
4.
Press
REC
to start recording.
NOTES:
• There are many different ways of connecting external equipment to your VCR. Please
refer to your equipment operation manuals for further information.
Optional Scart connection (not supplied)
Mono/Stereo Camcorder
INPUT SELECT
CHANNEL
AM/PM
REW FF
PLAY / X2
78
0
9
➘
Input Select
TINS-3776 ENGLISH.book Page 26 Thursday, May 25, 2000 4:18 PM
To Next Page
Loading...
