15
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO USE TO MAKE A RECORDING
(VC-MH703HM/VC-MH713LM)
7. If your VCR has long play facility and you wish
to change the
RECORDING SPEED, use
the
[/]to highlight SP. Press [ / ]
to select standard play (SP) or long play (LP)
as required.
8. Press SET to confirm the programme. The
VIDEOPLUS+ menu will reappear. If you wish
to enter further VIDEOPLUS+ recordings
repeat this procedure.
9. When you have completed entering timer
settings, press
MENU to remove the menu
from the TV screen.
10. Ensure that the tape on which you wish to
record is inserted into the VCR, then press
TIMER ON/OFF
once to place the VCR in
TIMER STANDBY mode. will be shown on
the display.
NOTES:
• You may also access the VIDEOPLUS+ menu by the following procedure:
i. Press MENU.
ii. The VIDEOPLUS+ option will be highlighted. Press SET to confirm.
Continue from step 2 above.
• If flashes a video tape has not been inserted into the VCR.
• If the video tape is ejected when the VCR tries to record the record protection tab has
been removed.
• During recording, press
STOP ( ) to cancel the recording. If there are further
recordings to be made, the VCR will return to TIMER STANDBY.
1/2
DATE PR START STOP
21/060212:0013:00SP
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
TAPE
SPEED :SP / LP
: SELECT : CHANGE
SET : ENTER MENU : EX I T
→
PLUS CODE . -
ONCE WE E K L Y D A I L Y
TINS-3776 ENGLISH.book Page 15 Thursday, May 25, 2000 4:18 PM
To Next Page
Loading...
