17
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO SET A DELAYED RECORDING
7. Enter the start time using the [ / ] or the
NUMBER BUTTONS, hours first then
minutes (when entering less than 10 hours or
minutes add a '0' before the number), for
example for 21:05 start, press
2 1 0 5.
Then press to move to the next setting.
8. Enter the stop time, for example for 22:30 stop,
press
2 2 3 0.
9. If your VCR has long play facility and you wish to
change the
RECORDING SPEED, use the
[/] to highlight SP. Press [ / ] to
select standard play (SP) or long play (LP) as
required.
10. Press SET to confirm.
• The MENU now shows all the timer settings you
have entered. If you wish to make additional
timer recordings, repeat this procedure.
11. When you have completed entering timer
settings, press
MENU to remove the menu
from the TV screen.
12. Ensure that the tape on which you wish to
record is inserted into the VCR, then press
TIMER ON/OFF once to place the VCR in
TIMER STANDBY mode. will be shown on the
display.
NOTES:
• If flashes a video tape has not been inserted into the VCR.
• If the video tape is ejected when the VCR tries to record the record protection tab has
been removed.
• During recording, press
STOP ( ) to cancel the recording. If there are further
recordings to be made, the VCR will return to TIMER STANDBY.
1/2
DATE PR START STOP
21/060212:0013:00SP
9/07D03 21:05 -:-- SP
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
1/2
DATE PR START STOP
21/060212:0013:00SP
9/07D03 21:05 23:00 LP
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
TINS-3776 ENGLISH.book Page 17 Thursday, May 25, 2000 4:18 PM
To Next Page
Loading...
